All low voltage grades
Listed below are the main grades that we produce for low voltage applications. A brief description is provided; if a more detailed comparison is needed please click one of the insulation and sheathing sections on the previous page.
|
Grade |
Description |
Data |
| HFFR silane crosslinkable insulation and sheathing | ||
| CT06-30:CT06-81A | For building and conduit wire standards such as BS7211 |
|
| CT06-30:CT06-81B | Ambient cure version of CT06-30:CT06-81A |
|
| SX545:CM540U |
For building and conduit wire standards such as BS7211 |
|
| SX538:CM540U | High fire performance for fire tests such as VW-1 |
|
| SX559:CM540U | High fire performance for fire tests such as VW-1 |
|
| SX407:CM424 | LOCA approved for nuclear installations |
|
| Flexible HFFR silane crosslinkable insulation and sheathing | ||
| CT09-03:CM401-2S |
High oil resistance for rail, ship and offshore cable |
|
| CT09-05:CM401-2S |
High UV and heat resistance for PV solar panel cable |
|
| CT09-13:CM424 | Very flexible with good hot deformation for appliance flex |
|
| HFFR thermoplastic sheathing | ||
| TP519C | Fast extrusion for PVC screws and data cable |
|
| TP521 | General purpose with good anti-crack properties |
|
| CT08-93 | High fire performance and char forming characteristics |
|
| TP543C | High fire performance grade |
|
| TP564 | High fire performance and good tear strength |
|
| Flexible HFFR thermoplastic sheathing | ||
| CT09-12 | General purpose grade |
|
| CT09-07 | Easy tear designed for BS 7655 LTS-2 |
|
| Low voltage silane crosslinkable (XLPE) insulation | ||
|
SX408:CM401 |
General purpose for use up to 3KV |
|
| SX522A:CM401 | Ambient cure general purpose |
|
| SX522A:CM401CDS | SX522A with catalyst for small conductors < 2,5mm2 |
|
| SX546:CM497CD | 125oC temperature rated |
|
| SX558:CM401 | Improved cut through performance |
|
| Low voltage silane crosslinkable (XLPE) flexible insulation | ||
| SX552:CM422 | XLPE general purpose insulation |
|
| SX554:CM493 |
EPR based general purpose insulation |
|
| UV resistant low voltage silane crosslinkable (XLPE) insulation | ||
| SX490:CM401 | 2.5% carbon black filled for aerial cable |
|
| SX523:CM493 | 10% carbon black filled for aerial cable |
|
Please note that all of the silane crosslinkable grades are shown as a system with a graft and a catalyst. These are normally used in the ratio of 95:5. The most common catalyst masterbatch is shown in the table but there are others available which helps us to more accurately match your property requirements and processing conditions.
Thermoplastic grades are normally available in natural, black and with additional UV stabilization.